the mc2006 is a low-noise, transimpedance amplifier with agc, manufactured in an advanced, low-cost, submi- cron cmos process. its wide dynamic range, differential output and high-pin bias make it well suited for telecom- munications, especially oc-3/stm-1. however, the mc2006 is intended to meet the needs of both telecom and datacom users. the mc2006 is designed to be used with the mc2045 post-amplifier ic. when combined with a photodiode, the chipset forms a high-performance, low- cost 5v receiver. a conexant business ? > low cost ic, fabricated in advanced sub-micron pure-cmos process. > receiver sensitivity typically - 40 dbm at 155 mbps, when integrated into a module withsuitable photodiode and post-amplifier > 115 mhz -6 db bandwidth with multi-pole roll off optimized for oc-3/stm-1 > typical differential gain of 200kohms at low signal levels > agc gives continuous operation to > 0 dbm > > 35 db power-supply noise rejection > 65 mw power consumption at 5v power supply > available as die or in soic8 package > key features 155 mbps pre-amplifier mc2006 ycy-ypfy 0ypy-5eb- dy-sy1 511 ya6m5eb- 5pi 05l ct nk nk k2 o 2 o 20a abpe-bm >
www.mindspeed.com/salesoffices general information: (949) 579-3000 headquarters C newport beach 4000 macarthur blvd., east tower newport beach, ca 92660-3007 order# 500000a m01-0442 ? 2002 mindspeed technologies ? , a conexant business. all rights reserved. mindspeed and the mindspeed logo are trademarks ofmindspeed technologies. all other trademarks are the property oftheir respective owners. although mindspeed technologies strives for accuracy in all its publications, this material may contain errors or omissions and is subject to change without notice. this material is provided as is and without any express or implied warranties, including merchantability, fitness for a particular purpose and non-infringement. mindspeed technologies shall not be liable for any special, indirect, incidental or consequential damages as a result of its use. a conexant business ?
|
